Modify Selection
- Document types:
- Conference papers
Home Links
Results 521 - 530 of 646
-
1/1/2000 - Conference papersA summary of (a) training techniques to act competently in emergencies; (b) simulations that enhance the perceptual, judgment and decision making skills of workers and (c) the linkages between financial investments and skills training.
-
1/1/2000 - Conference papersNIOSH is investigating remote sensing technologies to detect, monitor, and mitigate surface mine hazards that lead to slope failure. A field-portable spectro-polarimetric imager and a stationary interferometric radar device are promising options.
-
11/1/1999 - Conference papersA system that ties acceleration data with Global Positioning System (GPS) data was developed, assembled, and tested to track the frequency and causes of jolting and jarring of heavy equipment operators.
-
10/1/1999 - Conference papersThis paper addresses the assessment of turn-to-turn insulation deterioration that can be resolved using an on-line monitoring technique to predict incipient failure prediction in electric power system components.
-
10/1/1999 - Conference papersA Mine Safety and Health Administration-permissible load rate monitoring system was developed.
-
10/1/1999 - Conference papersA series of four coal combustion experiments was conducted at the National Institute for Occupational Safety and Health, Pittsburgh Research Laboratory in the Safety Research Coal Mine to evaluate the response of optical and ionization smoke and CO sens...
-
10/1/1999 - Conference papersPresented in this paper is a theoretical review of the relationships that should exist between electrical winding parameters and the mechanical vibration of a-c machine elements under normal and faulted operating conditions.
-
9/1/1999 - Conference papersAn experiment is described in which hollow inclusion cells were used to measure stress in a jointed rock mass during drift development at the Stillwater Mine, Nye, MT, USA.
-
8/1/1999 - Conference papersRecent studies by researchers from the National Institute for Occupational Safety and Health indicate that shear loading contributes significantly to failure of bolts used for rock reinforcement in coal mine roofs. Laboratory tests on 17 bolts were con...
-
8/1/1999 - Conference papersThis paper discusses a design methodology for standing secondary tailgate supports, using the performance characteristics generated in the NIOSH Mine Roof Simulator (MRS) to match load characteristics of various supports to ground reaction behavior.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program